AISIN announced an expanded aftermarket product line covering cooling systems, drivetrain, steering, suspension and other categories. For buyers managing Toyota, Hyundai and Kia replacement-parts inquiries, the announcement is a useful reminder: a broader product range creates more options, but each part still needs to be checked against its intended vehicle and configuration.
The company said the program includes approximately 10,000 replacement-part SKUs, with a selection introduced at AAPEX 2026. Fuel pumps, hub bearings and shock absorbers were among the products identified for the display.
What AISIN Announced
In its October 27 announcement, AISIN said it had established a pilot program with a China-based supply-chain partner to expand into additional maintenance-related categories.
The new range had begun rolling out through online sellers. Expansion into offline channels was planned by the end of 2026. AISIN also said a joint venture was pending following the pilot, with further details to be announced upon completion.
For distributors and workshops, the announcement is relevant beyond a single product category. Buyers often manage cooling, fuel, suspension and steering requests at the same time. A wider range may provide more sourcing options, but a quotation still depends on the exact reference and application.
AISIN’s announcement does not provide a complete Toyota, Hyundai or Kia application list. Buyers should check the current supplier catalog and confirm each requested part before ordering.
From Industry News to a Practical Sourcing Check
A buyer may begin with a request such as “Camry brake pads,” “Hyundai water pump” or “Elantra control arm.” That identifies the product family, but it may not identify the correct part.
Before comparing offers, establish:
- The OE reference or old-part marking, if available;
- Vehicle make, model, year and relevant configuration;
- Installation position and side where applicable;
- Whether the request is for an individual component or an assembly;
- The quantity and destination for each quotation line.
The Toyota, Hyundai and Kia links below are examples from NodeMotive’s own catalog. They are not a list of the specific applications announced by AISIN, and they do not imply an AISIN brand relationship or interchange.
Toyota Camry Brake Pads: Check the Application Before Quoting
AISIN’s company information states that AISIN Aftermarket distributes ADVICS brake products. That is separate from the specific product categories identified in the expanded-line announcement. Buyers should not assume that a particular Camry brake pad is included in the new program without checking the relevant supplier catalog.
For buyers sourcing Toyota brake components, NodeMotive provides a separate Toyota Camry brake pad catalog. The vehicle-and-category page gives buyers a place to review listed applications and references before narrowing an inquiry.
When requesting a Camry brake pad quotation, provide the information available for the vehicle and required set:
- Position: front or rear;
- Reference: Toyota OE number or another verified part reference;
- Vehicle details: model year, market and relevant configuration;
- Package contents: confirm whether the required shims, wear indicators or hardware are included;
- Quantity: specify the number of sets required for each reference.
If you have an FMSI/D-number or WVA reference, include it as supporting information. The supplier should still confirm that the reference matches the intended application and quoted product.
Hyundai Water Pumps: Match the Reference and Assembly
Cooling-system components are among the categories covered by AISIN’s announcement. For buyers sourcing Hyundai water pumps, the main task is to match the requested pump to the vehicle and confirm what the quotation includes.
NodeMotive lists a Hyundai Getz water pump, OE 2510002566. The product page identifies the reference and published applications, giving buyers a starting point for checking an existing inquiry.
When comparing offers, ask whether the quotation is for the pump alone or includes other components. If a gasket or seal is required, confirm it with the supplier. Product names and photos do not always make the package contents clear.
For an RFQ, send the OE number or old-part marking, the vehicle and engine details, and the required quantity. A photo of the old pump can help when the reference needs clarification.
Hyundai and Kia Fuel Pumps: Define What You Need
Fuel pumps were among the products AISIN identified for its AAPEX display. For a buyer, the first quotation question is often whether the request concerns a pump component or a complete assembly.
NodeMotive’s catalog includes a Hyundai and Kia fuel pump assembly, OE 311102P000. Its listing provides specific vehicle and engine details for buyers to review.
If the original request says only “Santa Fe fuel pump” or “Sorento fuel pump,” ask for more information before combining it with other lines. The supplier may need the OE reference, vehicle configuration, old-part photo and required assembly contents to check the quotation.
Keep different references on separate RFQ lines. That makes it easier to confirm quantities and avoid comparing unlike assemblies as though they were the same part.
Hyundai Control Arms: Use the Vehicle Page to Narrow the Search
AISIN also identified suspension as a category in its expanded range. Buyers sourcing Hyundai control arms can start with a model-specific page and then review the individual product listings:
A model page narrows the search; it does not mean every listing fits every year or vehicle configuration. Open the relevant product and check its published application and OE reference.
For a clear control arm inquiry, specify the required side and position where applicable. Also ask whether bushings or a ball joint are included. Two control arm offers may use a similar description but cover different package contents.
Hyundai Tie Rod Ends and Rack Ends
Steering components require the same attention to position. A request for a “tie rod” may need clarification before a supplier can determine whether the buyer is asking for an inner or outer component.
NodeMotive provides vehicle-specific starting points for:
Check the individual listing for the relevant reference, position and application. When preparing an RFQ, state inner or outer and the required side where applicable. Include the old-part marking or a photo if the reference is uncertain.
Preparing a Multi-Item Auto Parts RFQ
A single customer order can contain brake pads, pumps and steering parts. It is useful to send them together, provided each requested part remains a separate line.
| RFQ detail | What to include |
|---|---|
| Part name | The component or assembly required |
| OE or reference | OE number or old-part marking, when available |
| Vehicle | Make, model, year and relevant configuration |
| Position | Front/rear, left/right or inner/outer, where applicable |
| Package contents | Any required components or hardware to confirm |
| Quantity and destination | Quantity per reference and intended delivery destination |
If some details are missing, identify the uncertain lines. That gives the supplier a clear starting point for checking the application before quoting.
NodeMotive Takeaway
AISIN’s expanded range highlights the breadth of categories buyers may encounter when sourcing aftermarket parts. The practical decision remains at part level: confirm the vehicle application, reference, position and contents before comparing offers.
Need to source Toyota, Hyundai or Kia replacement parts across several categories? Send a multi-item RFQ to NodeMotive with your available OE numbers, vehicle details, quantities and destination. Include old-part photos where they can help clarify the request.
